How To Cut Laminate: My Ultimate Guide


The uses of plastic laminate sheets are pretty diverse, from kitchen coating to bathroom surface lining. Therefore, we will need to use this material quite a lot in upgrading and repairing the house.

But do you know how to cut Laminate? Don't let mistakes affect your workflow or even your budget. Please refer to the article below to understand the most effective method to process this material.

How To Cut Laminate? 3 Easy Ways To Consider

There are many ways to work with this sheet plastic. But there are only three standard methods for shredding this material. These options are also moderately challenging to make easier for you to make.
  • Using a table saw

Using a table saw is the simplest and fastest way to process Laminate. However, you will need to have a saw table and other auxiliary tools available if you want to do this method.

First, you need to place the side of the plastic sheet parallel to the cutting edge to avoid the path of movement. During the measurement, you should mark a place slightly larger than the required size to minimize the lack of area.

Once prepared, bring the material slowly toward the saw blade. If you have experience, you can install the tongue backward, but many experts from TheKingLive suggest that you should not try this operation.
​​
  • Using a hand-held electric saw

Using a hand-held electric saw is the fastest and most economical method. You will only need a saw with a few items to fix and a flat surface. Mainly we will be able to use any surface as long as it is wide enough and balanced. So this is the best method to Learn How To Cut Laminate At Home.

Since the blade's position is not fixed like on the cutting table, I recommend using a wooden board or other hard material as a mold.

You just need to place the landmark on the surface where the Laminate is identified with the cutting part hanging on the edge and clamping it. It should be noted that the datum will need to be offset from the cut line.

Specifically, the distance between the edge of the saw foot and the nearest edge of the blade.

When cutting, a tip to help you limit the shortage is to turn the plastic sheet upside down when working. The bottom tends to be stiffer, so you won't have to worry about chipping when you put the saw blade in.
​

Cut by edge

Cutting by edge will make the cut more beautiful, but you will need a lot of work and meticulousness if you want to make it.

In addition to saws, you also need devices called laminate routing bits. At the beginning of the operation, we will fasten these tools to the surface so that its leading edge adheres to the material. Then we will move the saw blade in the desired direction.

Safety Tips

Whatever method you choose, pay close attention to safety issues. Laminate plastic does not create too much fine dust, but you should still wear a mask to protect against the effects of manipulation.

Find More Information:

How To Cut Laminate With Simple Methods

How To Cut Laminate: A Comprehensive Guide

Conclusion

Goggles are an essential item that you must not forget. Because a very high percentage of plastic pieces will be thrown off the cutting surface, these agents will leave serious injuries without glasses.

Hope that you have carefully considered and memorized all the information contained in today's article. Surely the manipulation process will also be much simpler if you have the help of these valuable knowledge.